PRODUCTS
ELECTRICAL PROBE SYSTEMS
THERMAL PLATES
LIQUID CRYSTAL SYSTEMS
RESOURCES
SUPPORT
ABOUT
INSTEC LC Cells are sourced from various LC Cell manufacturers
Parallel, anti-parallel, 90° twist cells
IPS parallel and perpendicular cells
Homeotropic (vertically aligned) cells
ITO patterned (no alignment layer) cells
Non-PI cells for blue phase LC
Guarding electrode cells to minimize parasitic capacitance
Apply electrical field to LC cells
Two BNC connectors
Secure contact with flip lid
Use with any side-loading stage
Use with INSTEC ALCT instruments
The TP102LC4 allows temperature-controlled Automatic Liquid Crystal Testing (ALCT) measurements to be made with low electrical noise and low leakage. Four cells can be loaded into the TP102LC4 for properties testing while maintaining a constant chamber temperature (opening the lid between samples is not required). This chamber is designed specifically for use with Instec’s S-type and SG-type LC cells. When used together with guarding cells (SG-type), a voltage can be applied to the guarding electrode to reduce parasitic capacitance and enhance measurement accuracy
Passive LCFS for filling up to 3 LC cells at one time (cells with 2 open ends)
LCVCH Vacuum filling chamber for LC cells with single opening, optional heating upgrade is available