- HOME
-
PRODUCTS
-
ELECTRICAL PROBE SYSTEMS
- ANALYTICAL PROBE STATIONS
- BENCHTOP PROBE STATIONS
- STANDARD MINI PROBE STAGES
- SPECIALTY MINI PROBE STAGES
- WAFER CHUCKS
-
THERMAL PLATES
- BENCHTOP THERMAL PLATES
- COMPACT THERMAL PLATES
- SPECIALTY THERMAL PLATES
- HALL EFFECT MEASURMENT
- ELECTRONICS PRODUCTS
- CONTROLLERS, COOLING SYSTEMS AND ACCESSORIES
- OPTICAL EQUIPMENT
-
LIQUID CRYSTAL SYSTEMS
- ALCT SYSTEM
- LC SYSTEM ACCESSORIES
- LC MATERIALS
- CUSTOM PRODUCTS
RESOURCES
SUPPORT
ABOUT
-
-
-
Flagship miniature electrical probing stage
Room temperature - 1000°C
25 mm × 25 mm SiC sample area
4 independent electrical probers with manual positioning
Optional triaxial connections
Optional addtitional feedthroughs
HP1000V-PM
PRODUCT INQUIRY -
-
DESCRIPTION
The HP1000V-PM is a compact high-temperature probing solution ideal for electrical characterization of challenging semiconductor samples. By combining precision temperature control with electrical probing and environmental control, the HP1000V-PM offers a convenient solution for temperature dependent characterization or analysis.
The HP1000V-PM is capable of heating a 25mm x 25mm sample area up to 1000ºC with ±0.1ºC resolution and stability. Four independently positioned electrical probers are manually landed onto the sample (wire bonded samples are also supported), and can be connected to a wide range of measurement tools such as multimeters, source measurement units, or parameter analyzers. Optical access via a large optical window further expands the capabilities of the probing stage to allow spectroscopy or microscopy with simultaneous electric field application. This includes optical microscopy, Raman spectroscopy, and more!
The HP1000V-PM features a compact aluminum chassis with integrated water-cooling channels, and your choice of a gastight or vacuum tight seal. Evacuation or gas purge can be used to prevent oxidation, or to simulate specific environments. Electrical probers and optical windows are easily replaceable, and can be purchased separately an any time, including variations such as larger or smaller tip diameters, IR compatible materials, and more. SMA feedthroughs are included by default (Coaxial BNC to SMA adaptor cables are included), but coaxial or triaxial BNC feedthroughs are available by request.
Included with every HP1000V-PM system are an mK2000B precision temperature controller, InstecApp companion software for data logging and visualization, and a recirculating water-cooling system for keeping the stage close to room temperature while heating. Programming SDKs for the mK2000B are available by request to interface the mK2000B with custom software, perfect for synchronizing multiple instruments together into a single software interface. Each HP1000V-PM system comes with a 1-year warranty, and technical support for the lifetime of the product.
For more information on INSTEC probing solutions, check out our full Electrical Probing Solutions Catalog!
-
THERMAL FEATURES
Temperature Control
mK2000 with programmable switching PID method
Thermal Block
Flat SiC ceramic sample area
Sample Thermal Cover
Removable Inner sample cover with
additional window
Temperature Minimum
30°C (active cooling not available)
Temperature Maximum
1000°C
Temperature Sensor
S type thermocouple
Maximum Heating Rate
+50°C per minute under 800°C, +20ºC/min over 800ºC
(Faster heating rates available with customization)
Minimum Heating Rate
0.5°C per minute
Temperature Resolution
0.1°C
Temperature Stability
Less than ±0.5°C
Power supply
Universal power input - 700W maximum power
Software
Windows 10/11 software to record and
export temperature-time data
-
ELECTRICAL FEATURES
Electrical Probers
Four (4) DC to 500 MHz electrical probes (200V /1A max)
- Prober material options such as tungsten-rhenium, beryllium-copper, or other materials
- 25um or 5um tip radius options
- Additional standalone electrical feedthroughs available by request
Ideal for pad sizes larger than 1000 um x 1000 um*
*Smaller pad sizes require -MP or -MPS models
Electrical Feedthrough Connectors
SMA Coaxial Feedthroughs (standard)
Coaxial, floating, or triaxial BNC connector options
Optional additional feedthroughs available by request
Sample Area Electrical Bias
Electrically grounded (standard)
(Electrically floating or triaxial structure options with -MP series)
-
OPTICAL FEATURES
Optical access
Reflection only
(Transmission aperture available with -MP Series)
Minimum Objective
Working Distance
9.5 mm
Top Window Aperture 38 mm diameter aperture (42mm x 1mm glass window)
Top Viewing Angle ±60° from normal
-
STRUCTURAL FEATURES
Sample Area
25 mm x 25 mm
Sample Clips
Includes 2x electrically grounded spring loaded sample clips
Note: electrically floating sample clips available by request
Chamber Height
6 mm
Atmosphere Control
HP1000G-PM; Gas purging capability to control humidity, condensation, and oxidation (maximum +0.5 Bar)
HP1000V-PM; Low-Vacuum (Less than 9.9*10^-3 mBar) compatability available with KF16 vacuum flanges on flexible vacuum bellows
Frame Cooling
Integrated frame cooling channels with included water cooling system Window and objective protection
Window and Objective cooling* by external air cooling system. Window Defrost fixture included, pressurized air source not Included
*Objective cooling may or may not be required - be sure to consult with your microscope/ objective manufacturer to verify the operating temperature range
Mounting
Horizontal and vertical mounting capability
Note: Optional sample clips are highly reccomended for vertical mounting applications
Chamber Dimensions
180 mm x 130 mm x 26.5mm
*Overall device footprint may exceed these dimensions, be sure to consult a sales@instec.com to ensure fitment into optical instruments
Weight
1650 g light-weight aluminum body